Render painting and re-coating in Elm Park. Cleaned, stabilised and coated with breathable masonry paint or a full re-coat system. Fixed quotes.
Not every tired wall needs re-rendering. A sound render that has gone green and chalky usually needs cleaning, stabilising and coating, which costs a fraction of the alternative. The trick is being honest about which one you have.
Many Elm Park houses were coated in heavy masonry paint years ago, and on the exposed gable ends that coating is now peeling in sheets. Stripping the failed layers back before re-coating is what stops the new finish lifting in exactly the same way.
Usually not. Algae is a north-facing and damp-shade problem, not a structural one. Cleaning and treating it, then coating, costs far less than re-rendering and it is what most Elm Park walls actually need.
On a modern cavity wall, often yes. On a solid 1930s wall a non-breathable paint traps moisture in the brick and you get damp inside. The coating has to suit the wall, not just the colour chart.
On a properly cleaned and stabilised wall, ten years or so. On one that was coated over algae and chalk, two. As with everything on a wall, the preparation is the job.
Yes. A breathable coating can take a new colour, and paler shades hide dirt and suit the Elm Park streets best. Very dark colours absorb heat and are more likely to show movement cracks.
A good breathable system on sound render lasts many years before it needs cleaning or a refresh, far longer than a single coat of shop masonry paint.
It is usually far less work than re-rendering, which is why sound render is coated rather than replaced. If the render is hollow or badly cracked, a coating only hides the problem for a season.
Washed down, treated for algae, and a stabilising primer where the surface is chalky.
On solid 1930s walls the coating has to let moisture out. Standard masonry paint on the wrong wall causes damp rather than curing it.
Where a thin coat will not do it, a proper re-coat system gives a new finish without stripping the render.
If the render underneath is failing we will tell you that coating it is money wasted.
Loose and blistering coatings removed first, so the new coat bonds to the render rather than to old paint.
Green growth killed off with a biocide wash and given time to work before any coating goes on.
Send a photo or a quick video of the room on WhatsApp, or get a free fixed quote, no obligation, and we’ll tell you straight what it needs.
